Cordial CLA 10 LL 4

The Cordial CLA LL 4 speaker cable is designed for professional use under harsh stage conditions. This cable is intended for temporary applications such as outdoor festivals, events and fixed installations, but is also used within industrial environments. Thanks to its rugged construction, the cable is suitable for line array systems flown at high altitudes or laid directly on the ground without additional protection.

The high load capacity is achieved through the use of a so-called heavy rubber hose line (H07RN-F). The CLA LL 4 uses Titanex® material, which is resistant to high solar radiation, rain and low temperatures. In addition, this material has good resistance to certain chemicals and is flame retardant according to standards C2, NF C 32-070 and IEC 60332-1. The cable is free of silicones and halogens.

To match the power transmission of modern loudspeaker systems and the requirements of professional applications, this cable is assembled according to current VDE guidelines. The wire thickness of 4 x 2.50 mm² (AWG 14) ensures stable and clear signal transmission even at high power levels. Transparent shrink sleeves are attached to both cable ends, allowing easy labeling for temporary projects or permanent installations.

Cordial CLA 10 LL 4 features:

• 4x 2.50 mm² conductor thickness
• Titanex® H07RN-F 4G2,5 cable (according to EN 50525-2-21 and IEC 60245-4)
• oil-resistant, silicone- and halogen-free, flame-retardant according to C2, NF C 32-070 and IEC 60332-1
• certified according to VDE guidelines
• transparent shrink sleeves for easy cable identification
• rated up to 250V AC and 30A

Connections:
1x speakON 4-pin female (Neutrik NL4FXX-W-L)
1x speakON 4-pin female (Neutrik NL4FXX-W-L)

Cordial CLA 10 LL 4 specifications:

• conductor cross-section: 4 x 2.50 mm²
• AWG: 14
• core structure: flexible conductors
• jacket material: special elastomer (rubber)
• application: loudspeaker cable
• conductor resistance: 7,98 Ohm/km
• cable type: H07RN-F 4G2,5 TITANEX®
• jacket: rubber