Positive Grid Spark PEDAL

The Positive Grid Spark Pedal brings together a complete Spark guitar setup in a single compact floor pedal. You get access to 33 amp models, 43 effects, a built-in 60-second looper, six presets, a tuner, and the extensive features of the Spark app. Thanks to its 6.35 mm stereo line outputs, USB-C audio interface, headphone output, MIDI connections, and expression pedal input, you can use the Spark Pedal at home, in the studio, during rehearsals, on stage, or as part of an existing pedalboard.

The Spark Pedal uses the same HD Tone Engine as the Spark 2 and is suitable for electric guitar, acoustic guitar, and bass guitar. Through the Spark app, you can build complete signal chains with amps, cabinets, and effects. You also get access to ToneCloud and Spark AI. The built-in battery provides up to about seven hours of battery life, so you’re not tied to a power outlet.

A complete Spark rig in pedal form
The Positive Grid Spark Pedal is designed for guitarists and bassists who want to consolidate their entire sound into a single compact device. Amp models, effects, presets, a looper, and direct connection to a PA or computer are all integrated. The HD Tone Engine is at the heart of the pedal. This DSP technology is also used in the Spark 2 and offers 33 amp models and 43 effects. With these, you can create sounds for electric guitar, acoustic guitar, and bass. You can connect the Spark Pedal directly to a PA system, use it for recording via USB-C, connect it to a guitar amplifier, or incorporate it into a pedalboard. A 3.5 mm stereo headphone output is included for silent practice.

33 amp models and 43 effects
The Spark Pedal features 33 ampmodels and 43 effects. Using the Spark app, you can build a complete virtual signal chain with amps, cabinets, drive effects, modulation, delay, reverb, and other effect types. If you already use a guitar amplifier that you’re happy with, you can disable the cabinet simulation. The Spark Pedal will then function as an effects processor within your existing setup.

[[READMORE]]

Amp Mode and FX Mode
The controls are designed so that key parameters are accessible directly from the pedal. The top panel features five knobs and three metal footswitches. In Amp Mode, you use the central multifunction knob to select the amp model and adjust the volume. The other four controls adjust Gain, Bass, Mid, and Treble. This makes the controls work similarly to those of a traditional guitar amplifier. Press the central control, and the Spark Pedal switches to FX Mode. The other four controls then adjust Drive, Modulation, Delay, and Reverb. This allows you to adjust effect levels while playing without having to navigate through menus.

Six presets spread across two banks
The Spark Pedal can store six presets, spread across two banks. This allows you to prepare multiple sounds and recall them during a rehearsal or performance using the footswitches. The multicolored LED indicators provide information about the active preset, mode, looper status, and battery status. There is also a multicolored LED ring surrounding the central control knob.

Built-in 60-second looper
The built-in looper has a recording time of 60 seconds per track. You can record a part and then play multiple overdubs over it. The footswitches provide direct control over recording, overdubbing, playback, stop, undo, and erase. This means you don’t have to navigate menus while creating a loop. The looper is great for practicing, developing ideas, improvising, and live performances. For example, you can first record a chord progression and then play a solo over it.

Built-in tuner
In addition to the amplifiers, effects, and looper, the Spark Pedal features a built-in tuner. This means you don’t need a separate tuner on your pedalboard to tune your guitar or bass.

Spark app for iOS and Android
The Spark Pedal connects to the Spark app for iOS and Android via Bluetooth 5.0. In the app, you’ll have access to extensive settings for amps, cabinets, and effects, and you can build complete signal chains. The Spark app also supports Spark AI. With this feature, you can describe the sound you’re looking for, and the software will generate a suitable sound setting. You can then customize this sound and save it as a preset. ToneCloud provides access to over 100,000 user-created sounds. This allows existing Spark presets and saved ToneCloud sounds to become part of your Spark Pedal setup. Auto Chords analyzes music played through the app and displays the corresponding chords. This is useful when you want to learn songs or play along right away.

Stream music via Bluetooth
In addition to connecting to the Spark app, the Spark Pedal supports Bluetooth audio. This allows you to stream music, backing tracks, and practice tracks from a smartphone or tablet to the pedal and play along with them.

Directly to a PA
The rear panel features two 6.35 mm line outputs for left/mono and right. This allows the Spark Pedal to be connected directly to a mixer, powered speaker, or PA system. The output signal can be used with cabinet simulation included, so you can send a complete modeled guitar sound to the PA without a separate guitar amplifier.

USB-C Audio Interface The Spark Pedal can be connected to a computer via the USB-C port and used as an audio interface. This allows you to record your guitar or bass sound directly into a DAW. The USB-C port is also used for charging the internal battery, service functions, and firmware updates.

Headphone Jack For practicing without an amplifier or speakers, the Spark Pedal features a 3.5 mm stereo headphone output. This allows you to hear the full amplifier and effects simulation through headphones. This also makes the pedal ideal for practicing in places where a guitar amplifier isn’t practical, such as backstage, in a hotel room, or at home in the evening.

Use with your existing guitar amplifier
The Spark Pedal doesn’t have to be used exclusively as a complete amp modeler. You can also connect it to an existing guitar amplifier and disable the cabinet simulation. In that case, you’ll use the Spark Pedal for its effects and other features while your own amplifier forms the foundation of your sound. This also allows the pedal to be integrated into an existing pedalboard with other effects pedals.

MIDI In and Out
MIDIin andout ports are provided for external control. These use 3.5 mm jacks. Positive Grid includes two adapters that convert these jacks to the standard 5-pin DIN MIDI connector. MIDI can be used, among other things, for switching presets and synchronizing with other equipment.

Expression Pedal Jack A 6.35 mm TRS input allows you to connect an optionalexpression pedal. This lets you control parameters with your foot while playing.

Built-in battery with up to seven hours of battery life
The Spark Pedal has a built-in rechargeable lithium-ion battery with a capacity of 3000 mAh. A fully charged battery provides up to approximately seven hours of runtime. The charging time is approximately 4.5 hours. Charging is done via USB-C with a power specification of 5 V / 1 A. Thanks to the built-in battery, you can use the Spark Pedal during rehearsals, for warm-ups backstage, or at other locations without having to keep a power adapter plugged in.

Bluetooth and Wi-Fi
Bluetooth 5.0 is used for audio and the wireless connection to the Spark app. In addition, the Spark Pedal features 2.4 GHz Wi-Fi. This connection is used for OTA firmware updates, allowing new firmware to be transferred wirelessly to the device.

’sCompact Housing Measuring 17.5 x 10.4 cm, the Spark Pedal takes up very little space on a pedalboard or desk. The height of the housing without controls and switches is 4.72 cm. Including the protruding controls, the total height is 5.48 cm. The pedal weighs 0.56 kg and features three metal footswitches.

For home, studio, rehearsal, and stage use
Its connectivity options make the Positive Grid Spark Pedal suitable for a variety of applications. At home, you can practice directly through headphones. In a home studio, you can connect the pedal to a computer via USB-C. During a rehearsal, the device can be connected to a guitar amplifier, PA system, or the Positive Grid Spark CAB. For a performance or open mic night, you can connect the stereo line outputs directly to the PA. The Spark Pedal can also serve as an amp modeler and effects processor within an existing pedalboard.

Positive Grid Spark Pedal features and specifications:

• smart amp and multi-effects pedal for electric guitar, acoustic guitar, and bass guitar
• features the Positive Grid HD Tone Engine
• 33 built-in amp models
• 43 built-in effects
• Access to over 100,000 sounds via ToneCloud
• Support for Spark AI
• Support for Auto Chords
• Full integration with the Spark app
• six onboard presets spread across two banks
• built-in looper with 60 seconds of recording time per layer
• Record, Overdub, Play, Stop, Undo, and Clear functions
• Built-in tuner
• Five multifunctional knobs
• three metal footswitches
• Separate Amp Mode and FX Mode
• Direct control of Gain, Bass, Mid, and Treble in Amp Mode
• Direct control of Drive, Modulation, Delay, and Reverb in FX Mode
• multicolored LED indicators for presets and looper status
• Multicolored LED ring for general status information
• Separate indicator for battery level and charging status
• Separate connection indicator
• 6.35 mm instrument input
• Two 6.35 mm line outputs for L/Mono and R
• 6.35 mm TRS input for expression pedal
• 3.5 mm stereo headphone output
• 3.5 mm MIDI input and MIDI output
• USB-C for charging, firmware updates, and use as an audio interface
• Bluetooth 5.0 for audio and connection to the Spark app
• 2.4 GHz Wi-Fi for OTA firmware updates
• Cabinet simulation can be disabled for use with an existing amplifier
• Built-in rechargeable 3,000 mAh lithium-ion battery
• Up to approximately 7 hours of battery life
• Charging time of approximately 4.5 hours
• Power via USB-C: 5 V / 1 A
• Compatible with the Spark app for iOS and Android
• Supports iOS 15 or later
• Supports Android 8.1 or later
• Dimensions without protruding controls/switches: 17.5 x 10.4 x 4.72 cm
• Dimensions including protruding controls/switches: 17.5 x 10.4 x 5.48 cm
• Weight: 0.56 kg
• EU SKU: SPL11G-EUSSS

Positive Grid Spark Pedal connections:

• 1x 6.35 mm instrument input
• 2x 6.35 mm line outputs, L/Mono and R
• 1x 6.35 mm TRS expression pedal input
• 1x USB-C
• 1x 3.5 mm MIDI input
• 1x 3.5 mm MIDI output
• 1x 3.5 mm stereo headphone output

Included: Positive Grid Spark Pedal, USB-C to USB-C cable, 2x 3.5 mm MIDI to 5-pin DIN adapters, quick start guide