Walrus Audio Canvas Power HP+

The Walrus Audio Canvas Power HP+ is a professional, isolated power supply for pedalboards that combine traditional effects pedals with digital amp modelers and multi-effects processors. With two powerful outputs of 3,000 mA each, seven isolated 9V outputs of 500 mA, and a separately adjustable 9V output, 12V, or 18V, this power supply offers connectivity options for both compact stompboxes and equipment with significantly higher power consumption. Thanks to its slim housing, extensive cabling, and included mounting brackets, the Canvas Power HP+ is ideal for a clean and reliable power supply on stage, in the rehearsal room, and in the studio.

Powerful Power Supply for Digital Modelers and Effects Pedals
The Canvas Power HP+ was developed for modern guitar and bass setups that combine various types of equipment. Digital processors and amp modelers often require significantly more power than conventional effects pedals. That’s why this power supply features two separately isolated high-power outputs, each capable of delivering up to 3,000 mA. Both high-power outputs are switchable between 9V and 12V. This allows you to power certain processors from the Line 6 HX series and the Neural DSP Quad Cortex, provided that the voltage, current capacity, polarity, and connection match the requirements of the connected device. This allows digital processors and traditional effects pedals to be powered from a single central power supply, without having to use a separate AC adapter for each device.

Ten isolated DC outputs with various voltage options
In addition to the two high-power outputs, the Walrus Audio Canvas Power HP+ features seven separate 9V DC outputs, each delivering up to 500 mA. These are suitable for effects pedals that require a stable 9V power supply, including overdrives, delays, reverbs, modulation effects, and other analog or digital stompboxes. A tenth DC output is adjustable to 9V, 12V, or 18V. This allows you to connect pedals that require a higher supply voltage. This is relevant, for example, for certain preamps, boost pedals, and other effects specifically designed for use with 12V or 18V. All ten DC outputs are individually isolated. The power supply utilizes a modern switching power supply architecture with extensive filtering. This minimizes electrical interference between connected pedals and prevents unwanted noise in the signal chain. A well-isolated power supply is especially important for interference-free operation on pedalboards that combine analog and digital equipment.

[[READMORE]]

USB-C Port and Clear LED Indicators
In addition to the ten DC outputs, the Canvas Power HP+ features a 5V USB-C output with a maximum current of 1.5A. This port can be used to power or charge compatible USB devices within the specified capacity. The integrated LED power meter provides insight into the power supply’s current consumption. In addition, each DC output has its own LED status indicator, making it immediately clear which outputs are supplying power. This makes it easier to monitor the power supply while setting up a pedalboard or troubleshooting a power issue.

Slim enclosure for mounting under the pedalboard
Measuring 31.2 x 5.4 x 2.55 cm, the Walrus Audio Canvas Power HP+ features an elongated, low-profile enclosure. Its low profile allows for installation under many standard pedalboards, depending on the available space and the board’s construction. The power supply weighs just 426 grams and comes with universal L-shaped mounting brackets and an M3 Allen wrench. These allow the power supply to be securely fastened, ensuring that the connections and cabling stay in place during transport and use. The DC cables have also been carefully designed. The included cables feature a compact straight connector on one end and a right-angle connector on the other. This design makes it easier to connect pedals in tight spaces. The power supply also supports standard DC cables with a 2.1 mm barrel connector.

Expandable via the Canvas Power Link system
The Canvas Power HP+ is part of Walrus Audio’s modular Canvas Power series. Using the 24V Link system, the power supply can be expanded with compatible Canvas Power units. This allows you to expand an existing pedalboard setup without needing a separate mains connection for each additional power module. The Canvas Power HP+ is available as a standalone power supply with an external AC adapter and as a Link version for connection to a compatible existing Canvas Power supply. The Link version is shipped without its own AC adapter. When expanding the system, the available capacity of the power source being used must be taken into account.

Complete package with power cables and mounting accessories
The standalone version of the Canvas Power HP+ comes with an external 96W power adapter rated at 24V DC / 4A and a country-specific IEC power cable. In addition, the package includes various DC cables for connecting effects pedals with different connectors and polarities. Five DC cables measuring approximately 46 cm and three cables measuring approximately 91 cm are included, each with a straight and an angled connector. The package also includes two 2.1 mm cables with standard polarity, two 2.1 mm cables with reverse polarity, two 2.5 mm cables with reverse polarity, and two 2.5 mm cables with standard polarity. The different cable types are color-coded, making them easy to distinguish from one another. Always check the required polarity, supply voltage, and connector dimensions of an effects pedal before connecting it.

Walrus Audio Canvas Power HP+ features:

• professional isolated pedalboard power supply for effects pedals, amp modelers, and multi-effects processors
• 10 individually isolated DC power outputs
• 7 fixed 9V DC outputs with up to 500 mA per output
• 1 adjustable DC output for 9V, 12V, or 18V
• 2 high-power DC outputs with up to 3,000 mA per output
• High-power outputs can be switched individually between 9V and 12V
• 5V / 1.5A USB-C output for compatible USB devices
• Modern switching power supply architecture with extensive filtering
• Isolated outputs to minimize electrical interference and unwanted noise
• Suitable for hybrid pedalboards with analog and digital effects
• Suitable for compatible digital modelers and multi-effect processors with high power consumption
• LED power meter for monitoring power consumption
• Separate LED status indicator for each DC output
• Modularly expandable via the 24V Canvas Power Link system
• Slim housing for mounting under compatible pedalboards
• Compatible with standard DC cables featuring a 2.1 mm barrel connector
• Includes 5 straight-to-L-shaped DC cables, approximately 46 cm long
• Includes 3 straight-to-L-shaped DC cables, approximately 91 cm long
• includes 2 yellow 2.1 mm DC cables with standard polarity
• Includes 2 white 2.1 mm DC cables with reverse polarity
• Includes 2 red 2.5 mm DC cables with reverse polarity
• includes 2 blue 2.5 mm DC cables with standard polarity
• includes an external 96W power adapter rated at 24V DC / 4A
• includes universal L-shaped mounting brackets
• includes an M3 Allen wrench
• Power supply dimensions: 31.2 x 5.4 x 2.55 cm
• Power supply weight: 426 grams
• External power adapter dimensions: 14.6 x 5.7 x 3.15 cm

In the box:

1x Walrus Audio Canvas Power HP+ power supply
1x external 96W power adapter (24V DC / 4A)
1x European IEC power cord
5x DC cables, approximately 46 cm (straight to L-shaped)
3x DC cables, approximately 91 cm (straight to L-shaped)
2x yellow 2.1 mm DC cables with standard polarity
2x white 2.1 mm DC cables with reverse polarity
2x red 2.5 mm DCcable with reverse polarity
2x blue 2.5 mm DC cables with standard polarity
1x set of L-shaped mounting brackets
1x M3 Allen wrench