Dynacord Powermate 1000-3

The Dynacord PowerMate 1000-3 is a mixing console with built-in amplifier. This PowerMate 1000-3 is already the third generation of this mixer with built-in amplifier. The mixer actually has six types of audio devices in one compact frame: a mixer, two effects units, graphic equalizer, USB audio interface and power amplifier.

The mixer has 10 low-noise microphone preamps, 6 auxiliary buses (two of which are pre/post fader switchable). These Aux buses allow high flexibility for monitoring. The two effect processors offer 100 presets, including the well-known PowerMate reverb and delay. Each preset are edited and stored in 20 user memories.

The built-in USB audio interface has four playback and four recording channels simultaneously with a PC or Mac at studio standard quality: 24-bit / 96 kHz. An additional MIDI interface allows integration of instruments, such as keyboards. The mixer comes with a license for Steinberg's Cubase software, and the 11-band stereo graphic equalizer can be flexibly routed to master or monitor channels.

The amplifier is extremely powerful with as much as 2x 1000 W / 4 Ohms (RMS). Thanks to the modern switching-mode power supply and a Class-D output stage, it is very efficient and lightweight. The slim enclosure protected by a robust plastic cover with integrated handle for easy transport.

Dynacord PowerMate 1000-3 mixer specifications:

• Dynacord Powermate MKIII powered mixer
• class D amplifier
  
• 2x 1000 W (4 Ohms), 2x 600 W (8 Ohms), 2x 1350 W (2.66 Ohms)
  
• connections:
  - 10 channels
  - 10 mic jacks (XLR)
  - 10 line jacks (6.3 mm jack; 4 stereo)
  - 6 inserts (6.3 mm jack)
  - 4 outputs (XLR, 6.3 mm jack, SpeakOn rear panel)
  - 6 FX/AUX/Mon (6.3 mm jack)
  - 4 RCA jacks
  - USB jack
  - MIDI in/out (5-pin, rear panel)
  - lamp jack (12V DC)
  - footswitch (6.3 mm jack)
  - headphones (6.3 mm jack)
  - power cable (on rear)
  
• digital audio interface
  - 4 in/4 out
  - 24 bit AD/DA conversion
  - sampling rate: 44.1/48/88.2/96 kHz
  
• low-cut filter on all mono channels (80 Hz)
  
• voice filter on mono channels
  
• graphic stereo equalizer
  
• feedback filter on mono channels
  
• +48V phantom power supply
  
• dual stereo effect processor, with 100 standard presets, 20 adjustable
• tap delay
  
• 128 x 64 OLED display
  

Dynacord PowerMate 1000-3 mixer technical data:

• frequency range: 15 Hz - 70 kHz
  
• crosstalk: 1 kHz
  
• THD: <0.005%
  
• noise: -97 dB
  
• S/N ratio: 105 dB
• Dynacord part no.: DC-PM1000-3-UNIV
• Dynacord order no.: F01U131113
• dimensions (WxDxH): 443.7 x 483 x 135 mm (without cover), 510.5 x 571.5 x 164.5 mm (with cover)
• weight: 12.5 kg (without lid), 14 kg (with lid)

Included: lid, manual and power cable